DAINESE bargains: motorcycling helmets
All our helmets have the European homologation (E3) certificates

DESCRIPTION: The Airstream Course Cougar helmet offers an unwavering style with sharp, strong lines that skillfully combine colorful forms with minute details obtained through tone-on-tone technique and the stylization of a honeycomb structure that reflects the internal protective structure of the Wave back protector. The Dainese name on the sides gives the helmet even greater character and grants further dynamism Materials: - Composite fibre exterior in two sizes - Absorbent polystyrene foam shell with low-density central insert - Removable pads - Anallergic fabric padding on open-cell support - Removable “AIR” cap Ventilation: - Channelled F.F.V. system - Air vent on chin-rest - Back extractor Visor: - Visor disassembled without tools - Racing visor functionality: - Double D-ring fastener on throat - Nose-guard - Anti-buffeting spoiler on back - Wind-break

Available colors and color codes

DESCRIPTION: Dainese presents STREAM CITY: the final frontier of jet helmet technology! Five years after D-Jet was launched, Dainese turns its attention back to this sector with a product at the extreme cutting edge. Its revolutionary ventilation system is just one of the features making it an inseparable summer companion for every rider. The mechanism is controlled from the visor to exploit the air flow generated by the moving bike. Air enters the two front inlets to create a continuous, silent air flow within the helmet, removing heat and moisture through the extractors in the back of the helmet. The spectacle arm housing and hypoallergenic, breathable foam shell complete the helmet’s features, to give maximum comfort in all situations. Stream Tourer lets your passion for sport breathe Materials: - The injection-moulded, thermoplastic resin outer helmet, is produced in two sizes to meet the needs of every rider - Its absorbent polystyrene foam shell with central polyhedric perforations and upper collapsible structure enables more air to pass within the helmet, while providing greater protection against knocks and collisions - The double jersey mesh used for the seat of the helmet’s padding consists of a double-knit fabric which creates a breathable air space - Hypoallergenic, breathable fabric padding (cap) - The whole padding is easily removable to facilitate cleaning Ventilation: - The two back extractors dissipate hot air created within the helmet by sweating Visor: - Maximum cover, injection-moulded, toroidal scratch-proof polycarbonate visor, which controls the open/close mechanism for the front air inlets

Available colors and color codes

D-Tec® presents Air Stream Course, the new helmet created for racing following of the ergonomic and aerodynamic studies conducted by the Dainese Research & Development Department. The result is a helmet with avant-garde technological features capable of combining Dainese protection technology with the extraordinary comfort achieved thanks to an innovative ventilation system that improves the elimination of heat and humidity known as F.F.V. (Free Flow Ventilation) developed after long analysis in wind tunnels and on-track testing using measurement systems that guarantee objective and comparative data. The rider's head is perfectly housed in the helmet thanks to the in-depth ergonomic study that led to the definition of its interiors that accurately follow the head's profile and all its movements. The finest fibre glass bonded to aramidic and carbon fibres was selected for the shell in order to create a strong and lightweight structure. A light helmet limits the acceleration of the head and reduces riding fatigue for greater safety. Materials: - Composite fibre - Liner in polystyrene foam with central, low-density insert Protection against shock: - The new shell is in composite fibre obtained by bonding layers of uniaxial fiber glass, carbon, and aramidic fibre together with the Bag Moulding system to provide both strength and light weight. This helmet comes in two sizes. - The absence of holes on the upper pat of the shell increases structural strength because the continuity of the fibres is unbroken. The sleeker profile also improves aerodynamics. - The liner in polystyrene foam with central, low-density insert was designed for shock absorption by the distribution of impact over the greatest surface area possible. Microclimate: - Airstream Course is equipped with a particularly efficient ventilation system called the Free Flow Ventilation System that permits remarkable reductions in internal temperature and humidity levels. The system is composed of: - FRONT AIR INLETS: positioned on the mouth guard and equipped with shutter closing and wing profiles developed expressly to contain noise levels feed the ventilation system with elevated quantities of fresh air. - LATERAL FLOW DUCTS: the air that comes from the front air inlets flows through ducts that carry it to the front by passing through the visor attachments. - UPPER AIR FLOW DUCTS: from the front of the helmet, the air passes over the top of the head and exits the rear openings through special ducts. - INTERNAL AIR LINER: the liner positioned between the polystyrene and the rider's head is equipped with a special reticulate structure that creates a cavity that permits a consistent ventilation flow. - The system's efficiency was tested in both wind tunnels and extended road tests in which the temperature and humidity inside the helmet were constantly monitored. - The test results showed reductions in both the temperature and humidity inside the helmet compared with other ventilation systems. Ergonomics: - The shell and liner were designed according to the latest principles of ergonomics that make the Air Stream Course helmet easy to wear and especially comfortable during riding. - The cheek pads are interchangeable with others of different sizes to permit perfect the helmet's interior to be perfectly adapted to the rider's face. Other specifications: - Aerodynamics: - Like the ventilation system, the helmet's aerodynamic features were developed after extended theoretical study and testing in both wind tunnels and on race tracks and the open road. - The shape of the shell with its two grooves in the upper part helps channel the flows of air to optimise the resistance coefficient and lateral shaking buffeting values. - The spoiler at the back of the shell also helps keep buffeting values low while lowering noise levels at the same time. - Other functional features: - Double-ring chin strap closing. - Removable liner and cheek pads - Flat anti-fog visor with scratchproof treatment provided with eccentrics for visor tear-off system. - Standard-equipped with wind and nose guards. The helmets we sell have the European homologation (E3) certificates inside and not the American DOT certification.

DESCRIPTION: Materials: Protection: - The thermoplastic resin shell (in a single size) combines remarkable shock protection with low weight and high comfort - Shock absorption liner in polystyrene foam with central low density insert absorbs impact better in case of fall Comfort: - Microclimate: - Helmet aeration guaranteed by air inlet and extractor systems: the air is channelled inside the helmet through air inlets at the front and on the mouth guard and then swept outward by an extractor at the rear Ergonomics: - Padding in non-allergenic, breathable fabric for ideal fit - Removable cap and cheek pads for easier helmet cleaning - Quick-release chin strap

Available colors and color codes

High quality jet helmet. -Thermoplastic resin exterior in two shell sizes -Absorbent polystyrene foam shell with low-density central insert -Hypo allergenic, breathable fabric padding -Removable cap -Removable pads -Top double air-vents -Anti-fog, scratch-proof toroidal visor -Visor removal without tools -Quick-release chin fastener

Protection Tri-composite fibre exterior in two sizes. Absorbent polystyrene foam shell with low-density central insert. Comfort Free Flow Ventilation: ventilation system with air vents on chin, ducts channelled in the polystyrene and back extractor. Removable AIR cap. Hypo-allergenic breathable padding.

Protection Tri-composite fibre exterior in two sizes. Absorbent polystyrene foam shell with low-density central insert. Comfort Free Flow Ventilation: ventilation system with air vents on chin, ducts channelled in the polystyrene and back extractor. Removable AIR cap. Hypo-allergenic breathable padding.

Latest version of the 'Racing Ergon' models: the 'Evo 2', with new shaped interior, removable cheekpads and renewed venting inlets. The helmets we sell have the European homologation (E3) certificates inside and not the American DOT certification.

Latest version of the 'Racing Ergon' models: the 'Evo 2', with new shaped interior, removable cheekpads and renewed venting inlets. The helmets we sell have the European homologation (E3) certificates inside and not the American DOT certification.

Version of the 'Racing Ergon' models in composite fibre, with removable cheekpads and renewed venting inlets. The helmets we sell have the European homologation (E3) certificates inside and not the American DOT certification.

Version of the 'Racing Ergon' models in composite fibre, with removable liner and cheek pads. Renewed venting inlets. The helmets we sell have the European homologation (E3) certificates inside and not the American DOT certification.